Acoustic underlay for laminate flooring is a resilient layer fitted between the subfloor and floating laminate planks to cushion footfall and reduce impact noise reaching the room below. In the UK, most acoustic underlays cost between £2 and £12 per square metre, while tested high-performance membranes run from around £8 to £35 per square metre. This guide explains what drives those prices and how to choose well.

- Typical UK retail prices for acoustic underlay suitable for laminate flooring range from about £2 to £12 per square metre, while high-performance membranes cost £8 to £35 per square metre.
- Impact sound reduction is quoted as ΔLw in decibels: basic 2 mm foam underlays test at roughly 19–21 dB, whereas 5 mm acoustic membranes can reach 26–30 dB.
- Approved Document E of the Building Regulations sets sound insulation standards for separating floors in new-build homes and conversions in England and Wales.
- Acoustic underlay is commonly sold in rolls covering 10 m², 15 m² or 20 m², and larger rolls lower the cost per square metre.
- A 5–10% allowance for cutting waste is standard practice when calculating how much underlay a room requires.
Table of Contents
- What is acoustic underlay for laminate flooring?
- How much does acoustic underlay cost in the UK?
- What factors affect the price?
- Which type gives the best value for money?
- How much do you need and what is the total cost?
- Does acoustic underlay help with Building Regulations and leases?
- What should you check before buying?
- Frequently Asked Questions
This guide covers acoustic underlay for laminate flooring, but for wider UK price checks and material comparisons, the Corax Ads blog is a practical companion.
What is acoustic underlay for laminate flooring?
Acoustic underlay is a resilient layer laid beneath floating laminate planks that cushions footsteps and lowers impact noise travelling into the structure below.
Acoustic underlay sits between the subfloor and the floating laminate planks. It cushions footfall, evens out small dips in the floor surface and reduces the impact noise that travels through the structure. Standard foam underlay is sold mainly to protect the boards; acoustic versions are also tested for sound performance.
Manufacturers quote impact sound reduction as ΔLw, measured in decibels. A basic 2 mm foam underlay might manage around 19–21 dB, while a 5 mm acoustic membrane can reach 26–30 dB in laboratory tests. The higher the figure, the more effectively the underlay softens impact noise such as footsteps.
Laminate is thin, hard and floats rather than being fixed down, so it transmits impact noise more readily than carpet. A good acoustic layer is usually the simplest way to reduce that noise without raising the finished floor height by much.
How much does acoustic underlay cost in the UK?
Most acoustic underlays suitable for laminate flooring cost between £2 and £12 per square metre in the UK, with specialist acoustic membranes priced from £8 to £35 per square metre.
UK prices are normally quoted per square metre and include VAT. Typical bands for underlay suitable for laminate flooring are:
- Basic PE foam, 2–3 mm: £1.50–£3.50 per m²
- Foil-backed foam or foam and polyester combination, 3–5 mm: £3–£7 per m²
- Recycled rubber crumb, 3–6 mm: £5–£12 per m²
- Cork or cork and rubber blend, 2–4 mm: £4–£10 per m²
- Wool and felt underlays, 7–10 mm: £6–£14 per m²
- High-performance acoustic membrane, 3–5 mm: £8–£20 per m², with some specialist products above £25 per m²
Underlay is usually sold in rolls covering 10 m², 15 m² or 20 m². A 10 m² foam roll typically costs £20–£45, a 10 m² rubber roll £50–£120, and premium membrane brands £90–£200 for the same coverage. Larger rolls generally bring the price per square metre down.
For a 20 m² living room, budget roughly £40–£140 for foam or cork, or £160–£400 for rubber or a high-performance membrane. Online orders often add £5–£15 for delivery, so compare the delivered total rather than the headline price.
What factors affect the price?
Material, density, tested impact sound rating, pack size and retail channel are the main factors that push acoustic underlay prices up or down in the UK.
Material is the biggest single factor. Recycled rubber and specialist acoustic membranes cost more than polyethylene foam because they are denser, heavier and independently tested for impact sound reduction, which means testing costs are built into the price.
Thickness matters, but only when it is matched by density. A 10 mm soft foam can perform worse than a 3 mm dense rubber layer. Look for a published ΔLw figure rather than judging performance from how thick the roll feels in the shop.
Pack size, brand and where you buy also move the price. DIY retailers are cheap for basic foam, while specialist acoustic suppliers charge more but publish test certificates that landlords, leaseholders and building control may ask to see.
Which type gives the best value for money?
For most UK homes, a 3–5 mm recycled rubber or dense foam underlay at £5–£10 per square metre offers the best balance of price and impact sound reduction.
For upstairs rooms in a typical UK house, a 3–5 mm recycled rubber or dense foam underlay covers most needs. It noticeably reduces footfall noise, stays stable under laminate and does not compress into ridges over time.
Cork is a natural alternative that adds a little thermal insulation and handles minor unevenness well, though it usually costs more than foam for a similar acoustic result.
If you live in a flat with a lease clause on noise, or you are working to specific performance targets, a tested acoustic membrane with documented ΔLw data is usually worth the extra spend. Test evidence is often more valuable than a few millimetres of extra thickness.
How much do you need and what is the total cost?
Measure the room's longest and widest points, multiply them together and add 5–10% for cutting waste to find the number of square metres to buy.
Measure the longest and widest points of the room and multiply them to get the area. Add 5–10% for cutting waste, since doorways, alcoves and radiator pipes all create offcuts that cannot be reused.
A 4 m × 4 m room is 16 m², so buy 17–18 m². At £6 per m² that is roughly £100–£110 for underlay, before laminate, beading, skirting and any levelling compound are added to the project.
Check the roll width against the room width before ordering. Rolls are commonly 1 m wide, so a 4 m wide room needs four runs plus spare length for the joins and any awkward cuts around the doorway.
Does acoustic underlay help with Building Regulations and leases?
Approved Document E sets sound insulation standards for separating floors in new-build and converted homes in England and Wales, and many UK leases require an acoustic underlay under hard flooring.
Approved Document E of the Building Regulations sets sound insulation standards for separating walls and floors in new-build homes, conversions and some refurbishments in England and Wales. It applies to the building structure, not to a loose underlay on its own.
In practice, a tested acoustic underlay is one of the tools used to reach those performance targets, particularly where a hard floor is laid over a timber or concrete separating floor. Scotland and Northern Ireland have their own equivalent guidance, so check the rules for your area.
Many leasehold flats also include a clause requiring carpet or an acoustic underlay beneath hard flooring. Read your lease carefully and keep the manufacturer's test data on file in case a neighbour or managing agent raises a query.
What should you check before buying?
Confirm the subfloor is clean, dry and level, check underfloor heating compatibility and choose a low thermal resistance underlay if the room has heating pipes or mats beneath it.
Lay underlay on a clean, dry, level subfloor. Over concrete, fit a damp-proof membrane first, because rising moisture can damage laminate boards and soften some underlay materials over time.
Butt the edges together without overlaps and tape the joints so the boards do not shift. An overlap creates a ridge that makes the laminate rock, which loosens the click joints and produces squeaks.
Check underfloor heating compatibility before you buy. Underlays suited to underfloor heating have low thermal resistance, typically quoted at 0.5 tog or less, and avoid thick rubber or foil backings that hold heat away from the floor surface. For product options, browse floor acoustic solutions, compare notes on the Corax Ads blog, or contact the Corax Ads team for guidance.
To compare specific laminate underlays by thickness, tog rating, and acoustic performance, start with floor acoustic solutions.
Frequently Asked Questions
How much does acoustic underlay for laminate flooring cost in the UK?
Expect roughly £2–£12 per square metre for most foam, cork and rubber underlays, and £8–£35 per square metre for tested high-performance acoustic membranes. A 20 m² room typically costs £40–£400 in underlay alone, depending on the specification chosen.
Can acoustic underlay be used with underfloor heating?
Yes, provided the underlay is rated for underfloor heating. Choose one with low thermal resistance, usually 0.5 tog or less, and avoid thick rubber or foil-backed products that trap heat below the laminate surface.
Does acoustic underlay really reduce noise from laminate flooring?
It reduces impact noise such as footsteps and dropped objects, typically by 19–30 dB depending on the product's tested ΔLw figure. It has far less effect on airborne noise, such as voices, music or television sound.
Do I need acoustic underlay in a flat?
Many UK leasehold agreements require carpet or an acoustic underlay beneath hard flooring to limit noise to neighbours, and Approved Document E targets apply to separating floors in new-build and converted flats.
How thick should acoustic underlay be for laminate?
A 3–5 mm dense underlay is usually enough for domestic laminate, because density and tested sound performance matter more than raw thickness. Very thick soft foam can feel spongy and cause plank joints to flex.
